224B
**The extremely rugged and dependable Model 224B BEVELMASTER™ portable ID mount pipe beveling machine tool is ideal for beveling, facing and/or counterboring on larger pipe. The tool is configured with an in-line feed knob and two-speed pneumatic drive motor at a right angle to the lathe head. The Model 224B System pipe beveling machine comes complete with (3) tool holder assemblies, mandrel assemblies, mandrel head assemblies (3 jaws), upper lifting frame (floor stand available as an option), pneumatic motor assembly wrench kit and operator’s manual. This is the new standard of precision in larger diameter beveling.**
Quicklinks:
Machine Package
Technical Specifications
Documents
Rental/Buy Now
Optional Accessories
Request a demo
Quicklinks:
Machine Package
Technical Specifications
Documents
Rental/Buy Now
Optional Accessories
Request a demo
| Pipe/Tube Size: | 6.813" - *42.000" (173.0 mm - *1066.8 mm) |
| Wall Thickness: | **2.340" (59.4 mm) max |
| Drive Options: | Air Hydraulic |
Machine Package Includes:
*With optional accessory included
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
*** 1 Toolbit when using single point kit
Operating Manual - 224B
Technical Specification - 224B W/ Air, Hydraulic Motor
- Model 224B Sub. Assembly
- Tool Holder Assembly
- Drive Motor Assembly
- Mandrel Assembly
- Mandrel Head Assembly, 3 Jaw
- Lathe Lifting Frame Assembly
- Jaw Block Set
- Foot Pedal Assembly
- Wrench Kit
- Operators Manual
| Technical Specifications | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID Mounting: Standard Mandrel Extension Kit (option) |
6.813" - 24.630" 24.530" - *42.000" |
(173.1 mm - 625.6 mm) (623.1 mm - 1066.8 mm) |
|||||||||||||||||
| OD Machining (max): Standard Single Point Accessory (option) - Beveling Single Point Accessory (option) - Flange Facing |
24.000" 42.000" 50.000" |
(609.6 mm) (1066.8 mm) (1270.0 mm) |
|||||||||||||||||
| Counterboring: | 8.500" - 24.000" | (216.0 mm- 609.6 mm) | |||||||||||||||||
| Wall Thickness: Standard Form Tool Single Point Insert |
**2.340" **5.000 |
(59.4 mm) (127.0 mm) |
|||||||||||||||||
| Axial Feed Travel: | 5.380" | (136.7 mm) | |||||||||||||||||
| Feed Rate: (Per Revolution) | .083" | (2.1 mm) | |||||||||||||||||
| Weight: | 420 lbs | (190 kg) | |||||||||||||||||
| Cutting Head Toolbit slots: | ***3 | ||||||||||||||||||
| Rotating head diameter: Standard Single Point Accessory (option) |
27.000" 60.780" |
(685.8 mm) (1543.8 mm) |
|||||||||||||||||
| Length over machine: | 39.750" | (1009.7 mm) | |||||||||||||||||
| Minimum Air Power requirement: | 95 cfm 90 psi |
(44.8 L/s) (621 kPa) |
|||||||||||||||||
| Minimum Hydraulic Power requirement: | 3 gpm - 15 gpm @ 1500 psi 15 gpm - 20 gpm @ 1000 psi |
(.19 L/s - .94 L/s) @ 10342 kPa (.94 L/s - 1.265 L/s) @ 6894 kPa |
|||||||||||||||||
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
*** 1 Toolbit when using single point kit
| Documents | |||||||||||||||||||
Technical Specification - 224B W/ Air, Hydraulic Motor
765RVC2
- Hydraulic Power Unit
- 15 HP motor, Variable 22 GPM ( 83.3 LPM), 1800 PSI (12410 kPa)
- 2 Hose design
- Electric 3 phase power
Air Caddy
- Filter/Regulator/Lubricator (FRL)
- Small Air Caddy: <165 cfm
- Large Air Caddy: >165 cfm