CouponMaster
The perfect solution for union halls, colleges, and trade schools where high numbers of coupons are utilized for basic weld training and for the qualification of welders using heavy wall pipe.
Tri Tool’s weld coupon machine is built around the rugged and dependable Model 208B BevelMASTER® and incorporates a strong, integral base stand for benchtop mounting.
Quicklinks:
Machine Package
Technical Specifications
Documents
Rental/Buy Now
Optional Accessories
Request a demo
Tri Tool’s weld coupon machine is built around the rugged and dependable Model 208B BevelMASTER® and incorporates a strong, integral base stand for benchtop mounting.
Quicklinks:
Machine Package
Technical Specifications
Documents
Rental/Buy Now
Optional Accessories
Request a demo
| Pipe/Tube Size: | *1.503" - 8.625" (*38.1 mm - 219.0 mm) |
| Wall Thickness: | **0.875" (22.2 mm) max |
| Drive Options: | Air 110V Electric 220V Electric Hydraulic |
Machine Package Includes:
*With optional accessory included
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
Operating Manual: 208B CouponMaster
- CouponMaster Sub. Assembly
- Tool Holder Assembly
- Air Motor Assembly
- Mandrel Assembly
- Jaw Block Assembly Set
- Lathe Stand
- Wrench Kit
- Carrying Case
- Operator's Manual
| Technical Specifications | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID Mouting: 2" - XX Mandrel (option) Standard Mandrel |
*1.503" - 1.650" 1.630" - 8.870" |
*(38.1 mm - 41.9 mm) (41.4 mm - 225.3 mm) |
|||||||||||||||||
| OD Machining (max): | 8.630" | (219.2 mm) | |||||||||||||||||
| Counterboring: | 2.000" - 8.330" | (50.8 mm - 211.6 mm) | |||||||||||||||||
| ID Chamfering: | 2.000" - 8.160" | (50.8 mm - 8.160 mm) | |||||||||||||||||
| Wall Thickness (Max): Air Electric |
**.875" **.438" |
**(22.2 mm) **(11.1 mm) |
|||||||||||||||||
| Axial Feed Travel: | 2.000" | (50.8 mm) | |||||||||||||||||
| Feed Rate: (Per Revolution) | .083" | (2.1 mm) | |||||||||||||||||
| Weight: w/ Air Motor w/ Electric Motor |
56 lbs 63 lbs |
(25.4 kg) (28.6 kg) |
|||||||||||||||||
| Cutting Head Toolbit slots: | 3 | ||||||||||||||||||
| Rotating head diameter: | 9.160" | (232.7 mm) | |||||||||||||||||
| Height over motor: | 28.130" | (714.5 mm) | |||||||||||||||||
| Machine Width: | 10.130" | (257.3 mm) | |||||||||||||||||
| Length over machine | 17.950" | (455.9 mm) | |||||||||||||||||
| Minimum Air Power requirement: | 85 cfm 90 psi |
(40.1 L/s) (621 kPa) |
|||||||||||||||||
| Minimum Electric Power | 20A@115V-50/60hz 10A@230V-50/60hz |
||||||||||||||||||
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
| Documents | |||||||||||||||||||
| Optional Accessories | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID Mounting: 2" - XX Mandrel |
1.500" - 1.650" |
(38.1 mm - 41.9 mm) |
|||||||||||||||||
| Non-marking:Sleeve Mandrel (size specific) | 2.000" - 8.480" | (50.8 mm - 215.4 mm) | |||||||||||||||||
| Flange Facer Kit | |||||||||||||||||||
| Elbow Mandrel Kit, Small | 1.630" - 2.560" | (41.4 mm - 65.0 mm) | |||||||||||||||||
| Elbow Mandrel Kit | 2.510" - 8.400" | (63.8 mm - 213.3 mm) | |||||||||||||||||
| Adjustable Pin Kit, Elbow Mandrel | |||||||||||||||||||
| Squaring Plate, Elbow Mandrel. | |||||||||||||||||||
| Pointer Kit, Elbow Mandrel | |||||||||||||||||||
| ID Tracking Module Kit | |||||||||||||||||||
| Miter Mandrel Kit | |||||||||||||||||||
| Dial Indicator Kit | |||||||||||||||||||
| Stainless Steel Jaw Block Kit | |||||||||||||||||||
| Air Caddy (Filter Regulator Lubricator) | |||||||||||||||||||
765RVC2
- Hydraulic Power Unit
- 15 HP motor, Variable 22 GPM ( 83.3 LPM), 1800 PSI (12410 kPa)
- 2 Hose design
- Electric 3 phase power
Air Caddy
- Filter/Regulator/Lubricator (FRL)
- Small Air Caddy: <165 cfm
- Large Air Caddy: >165 cfm