601SBCM
These low profile clamshells are split-frame lathes that sever and bevel in-line tube and pipe. The lathes split into two halves and lock all moving components for secure ease of handling and mounting. The collet style clamping self-centers and does not distort the work piece. It can be configured for clean-room use (No Lead) and are protected by tough Nickel plating that makes them easy to clean and decontaminate.
Quicklinks:
Machine Package
Technical Specifications
Documents
Toolbits
Rental/Buy Now
Optional Accessories
Request a demo
Quicklinks:
Machine Package
Technical Specifications
Documents
Toolbits
Rental/Buy Now
Optional Accessories
Request a demo
| Pipe/Tube Size: | ***.405" - 1.315" (10.3 mm - 33.4 mm) |
| Wall Thickness: | **0.250" (6.4 mm) |
| Drive Options: | Air 18V Cordless |
Machine Package Includes:
*With optional accessory included
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
***For tube sizes, contact Tri Tool Inc.
Operating Manual - 600SBCM Series Clamshells
Technical Specification - 601SBCM W/ Air Motor
*Double Bevel Requires 33-2930 Screw, Cap, #8-32 X 5/8 SS
- Model 601SBCM sub assembly
- Tripper Pin removal kit
- 18" extension whip
- Motor asssembly
- Wrench Kit
- Case
- Operators Manual
| Technical Specifications | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD Mounting: | .405" - 1.315" | (10.3 mm) (33.4 mm) |
|||||||||||||||||
| Wall Thickness: Severing with standard procedures Severing with special procedures Severing and single beveling Severing and double beveling |
**.250" **.358" **.250 **.188 |
**(6.4 mm) **(9.1 mm) **(6.4 mm) **(4.8 mm) |
|||||||||||||||||
| Feed Rate: (Per Revolution) | .003" | (.08 mm) | |||||||||||||||||
| Weight: | 4 lbs | (1.8 kg) | |||||||||||||||||
| Cutting Head Toolbit slots: | 2 | ||||||||||||||||||
| Rotating head diameter: | 3.450" | (87.6 mm) | |||||||||||||||||
| Main frame diameter: | 3.250" | (82.6 mm) | |||||||||||||||||
| Machine Width: | 2.330" | (59.2 mm) | |||||||||||||||||
| Minimum Air Power requirement: | 32 cfm 90 psi |
(15.1 L/s) (621 kPa) |
|||||||||||||||||
| Flexible Drive Shaft | 18.000" | (457.2 mm) | |||||||||||||||||
| Minimum Electric Power: | @115V @220V |
||||||||||||||||||
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
***For tube sizes, contact Tri Tool Inc.
| Documents | |||||||||||||||||||
| Tool Bits | |||||||||||||||||||
| Property | Degree | Part Number | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sever Lead | 99-5941C4 | ||||||||||||||||||
| *Double Bevel Use with 99-5941 |
37.5° | 99-5942C4 | |||||||||||||||||
| Sever Trail Use with 99-5941 |
99-5942C4 | ||||||||||||||||||
| Double Bevel Use with 99-5941 |
42.5° 45.0° 47.5° |
99-6003C4 99-7008C4 99-6004C4 |
|||||||||||||||||
| L.H. Single Bevel Use with 99-5941 |
42.5° 45.0° 47.5° |
99-5999C4 99-7010C4 99-6000C4 |
|||||||||||||||||
| R.H. Single Bevel Use with 99-5941 |
33.5° 37.5° 42.5° 45.0° 47.5° |
99-6337C4 99-5990C4 99-6001C4 99-7009C4 99-6002C4 |
|||||||||||||||||
| Socket Weld Inside | 99-6340C4 | ||||||||||||||||||
| Socket Weld Outside | 99-6341C4 | ||||||||||||||||||
| R.H. 'J' Bevel Use with 99-5941 |
30.0° | 99-6338C4 | |||||||||||||||||
| Sever Trail Use with 99-5941 |
99-6357C4 | ||||||||||||||||||
*Double Bevel Requires 33-2930 Screw, Cap, #8-32 X 5/8 SS
| Optional Accessories | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Weld Removal Tool Module Kit | |||||||||||||||||||
| Auto-Disengage Tripper Module Kit | |||||||||||||||||||
| Roller Cutter Wheel Assembly | |||||||||||||||||||
| Air Caddy (Filter Regulator Lubricator) | |||||||||||||||||||
Air Caddy
- Filter/Regulator/Lubricator (FRL)
- Small Air Caddy: <165 cfm
- Large Air Caddy: >165 cfm