Socket Weld Removal Kit
The Socket Weld Removal/Sever-Bevel Kit for 1/2" to 2 1/2" pipe sizes
incorporates a Model 601SB and a Model 602.5SB Clamshell. For socket
weld removal operations, a clamshell is mounted to the line pipe with
the tool bit positioned over the seal weld, the auto-feed tool module
then feeds the socket weld removal tool bit radially down to the
surface of the pipe. The socket weld tool bits and tool modules also
allow seal weld cutting between pipe and bulkheads. The clamshells can
also be configured for sever/bevel operations.
Counterboring
Model CBM -1 Counterbore Module Kit
The Model CBM-1 Counterbore Module Kit is a mechanical accessory to Tri Tool Models 601SBM, 602,5SBM and 602TSB Clamshells that provides the capability to counterbore pipe after an in-line spool has been removed. The counterbore module kit mounts to Tri Tool's 601SBM and 602.5SBM or 602TSB standard tool blocks and is infinitely adjustable to allow most counterbore diameters consistent with the clamshell to which the module is mounted. Kit includes on basic assembly, mounting adaptor and two tool bits.
Model CBM -2 Counterbore Module Kit
The Model CBM-2 Counterbore Module Kit is a mechanical accessory to Tri Tool Models 604SB through 612Sb Clamshells that provides the capability to counterbore pipe after an in-line spool has been removed. The counterbore module kit mounts to Tri Tool's P/N 08-0037 standard tool block or Tri Tool's 08-0049 extended tool block and is infinitely adjustable to allow any counterbore diameter consistent with the clamshell to which the module is mounted. Kit includes one Counterbore Module Assy, mounting adaptor and two tool bits.
Model CBM -3 Counterbore Module Kit
The Model CBM-3 Counterbore Module Kit is a mechanical accessory to Tri Tool Models 616SB/636SB Clamshells and 614RBL/636RBL Clamshells. The counterbore module provides the capability to counterbore pipe after an in-line spool has been removed. The Counterbore Module Kit mounts to Tri Tool's large SB Series and RBL series tool blocks and is infinitely adjustable to allow any counterbore diameter consistent with the range of the specific clamshell.
Weld Crown Grinder
• Automatic depth of grind
• Adjustable drive speed
• Commercially available drive chain
• Commercially available sanding belts
• Quick change lever
• Completely anodized
The Weld Crown Grinder is the perfect portable solution to the removal of weld crowns after pipe welding. This machine is extremely valuable to meet critical requirements of weld finishing for nondestructive testing, ultrasonic testing, and x-raying. It prevents any undercutting of the parent metal surrounding the weld and adjusts for any misalignment in fit up from out-of roundness. A spring tensioned sanding belt drum is lowered until surface tracking rollers come in contact with the pipe surface, automatically setting the depth of grind.
Tri Tool's bench tool simultaneously bevels, faces, and counterbores 1" to 3" elbows, crosses and tees with fast, accurate repeatability. In addition to end prepping new pipe, it is useful in reprepping or modifying end prep bevel angles, land thicknesses and counterbores. The Fitting Machine makes salvaging used fittings and pipe possible and very cost effective.
Model 550 CTC - Chipless Tube Cutting System
• Sized specifically from 3/16" (4.76 mm) to 2.0" (50.8 mm) OD Tubing
• All tools needed for operation are included with the system.
The Model 550 Chipless Tube Cutting System is a compact machine tool for rapidly and reliably severing tubes. This system is flight required hardware for many tactical US military aircraft and is used in civilian flight system maintenance roles as well
The Model 757RSS (remote start/stop) Hydraulic Power Supply is a variable volume (0 GPM to 12 GPM), pressure-responsive (0 to 1800 PSI), reversible-flow power unit for supplying hydraulic power to cutting and weld end preparation pipe lathes with integral hydraulic motors. A low voltage (24 volts) pendant provides start/stop control. The pendant allows operation up to 100 feet away from the power supply by addition of an pendant extension cable and 100 foot hydraulic hoses. For portability, the power supply is integrated into a cart frame with wheels and casters.
Model 765RVC Hydraulic Power Supply
The
Model 765 Remove Volume Hydraulic Power Source is variable-volume (0
GPM to 15 GPM), pressure-responsive (o to 1800 PSI, reversible-flow
power unit for supplying hydraulic power to cutting and weld end
preparation pipe lathes with integral hydraulic motors. A low voltage
(24 volts) pendant provides stop, start, volume control, and
forward/neutral/reverse flow direction control. The pendant allows
operation up to 200 feed away from the power supply by addition of an
extension cable and 200 foot hydraulic hoses. For portability, the
power supply is integrated into a cart frame with wheels and casters.
Single Point Machining
212B, 224B and 230B Single Point Kits
Single point machining allows more flexibility of cut for complex machining operations and compound bevel angles. Portable beveling machinery produces bevel angles primarily through the use of form tool bits that have angled cutting edges. Form tool bits can only generate bevel angles predetermined by their cutting surface. Single point machining utilizes generic cutting bits that produce bevels based on the feed angle, and direction of the bit holder. This permits the production of basic as well as compound bevel profiles with the same bit.
Single point kits have been designed to provide extended cutting capabilities for the Model 212B, 224B, and 230B. This means you can perform a much wider variety of end uses with the same equipment without the need to buy additional tools.
Elbow Mandrel Kit
Where the curves of a tee or elbow prevent the use of ramp blocks, an elbow mandrel grips the fitting by means of a series of contact pins. The pins slide in and out from the center of the head. A threaded push rod with a tapered end presses the pins outward for engagement with the ID bore.
Sleeve Mandrel Kit
The nylon sleeve mandrel is used to protect thin wall pipe from marring. A full-contact expanding sleeve is pressed against the bore by tightening a threaded rod. The rod draws back on an endplate, pulling the sleeve against a tapered core, simultaneously rounding the pipe.
Miter Mandrel Kit
Miter mandrels compensate for misalignment, or are used in irregular openings. Individual, threaded contact pins center and secure the head. A ball & socket system with bolts on the face of the head adjust angular offset up to 5 deg. in all directions.
FLEXDrive System
The versatile Flex Drive system extends the ability of a machine to cut into confined space that may prohibit the machine body from entering or restrict the operational clearance of the machine to a point where the operation could not be performed in a safe manner. Flex drive units are available for Tri Tool's 550 Chipless Tube Cutting System, the SBCM series of small OD in-line cutters, and the 300 Microfacer™ Machines (shown above). Call for information on which Flex Drive unit is applicable for your specific machine.
Full Support Pads
The 600 Series offers numerous mounting and clamping options such as full support pads that not only self center and clamp the machinery positively to the work, but provide protection from distortion or damage from clamping forces.
OD Tracking Module
OD Tracking Modules are the perfect solution to counter out-of-round conditions of pipe. Manufacturing, shipping and storage can cause pipes to be considerably misshaped. Machinery that mounts on the ID or OD surface of the pipe has a fixed axis of rotation. This leads to non-uniform weld prep profiles as measured around the circumference of the pipe end after cutting. The OD Tracking module utilizes a spring loaded tracking wheel that "reads" the surface distance from the rotational centerline of mounting and rotation. In this way the weld profile dimensions follow the pipe shape for proper prep geometry.
Optional Tool Holder Modules
Tri Tool manufactures a wide range of stock and custom tool holders. Modules of different lengths are sometimes required to position the tool bit to operate to a certain depth or feed rate. Other variations include specific feed angles and holders for use with custom tool bits Contact Tri Tool for tool holder information to work with your specific cutting operation.
SQM-1 and SQM-2 Squaring Module
Get the maximum value from your severing machine with our optional squaring module. After a sever is complete, the squaring module can be quickly positioned to square the tube end precisely. A manual feed allows the operator to precisely control the depth of cut. The squaring module's design allows it to be pivoted inward and locked over the tube end when squaring.
Return to Tri Tool main page.
