200 Series 
ID Mounted Beveling Machines
Elbow Mandrel Kit
Where the curves of a tee or elbow prevent the use of ramp blocks, an elbow mandrel grips the fitting by means of a series of contact pins. The pins slide in and out from the center of the head. A threaded push rod with a tapered end presses the pins outward for engagement with the ID bore.
Operators Manuals:
- Model 204B-EM Elbow Mandrels
- Model 206B-EM Elbow Mandrels
- Model 208B-EM Elbow Mandrels
- Model 212B-EM Elbow Mandrels
- Model 214B-EM Elbow Mandrels
Technical Specifications:
- Model 204B Bevelmaster™ Elbow Mandrel (128 KB)
- Model 206B Bevelmaster™ Elbow Mandrel (116 KB)
- Model 208B-EM Elbow Mandrels (87 KB)
- Model 212B Bevelmaster™ Elbow Mandrel (126 KB)
- Model 214B-EM Elbow Mandrels (81 KB)
© Copyright 1995-2013 Tri Tool Inc. All rights reserved.
LEGAL NOTICE: Please read these terms carefully before using this web site. Sitemap
NOTICE: All specifications listed on this site are subject to change without notice.
Please contact your Tri Tool sales representative for current info and specifications.